Surface welded, cladded metals
Properties
- Subtitle
Content
Manufacturing of surface welded multilayer metals by explosive cladding technology
Thanks to our experience in the field of explosive metalworkings, our company practises the special explosive cladding technology for producing two- or three-layer metals.
Advantages of the explosive cladding process over the conventional ones:
the high-quality metallurgical bond can be created between normally incompatible metals (e.g. aluminium and steel)
there is no practical limit to the geometry of the metals to be bonded
Very flexible technology, it can be used for almost any combination of materials. Cost-effective solution for the production of bimetallic washers and thermobimetals.
Development of control rod used in reactor technology
Image gallery
szabalyzo_rud_2-b.jpg
Intro
In 2019, we developed a reactor technology control rod for the Eötvös Lóránd Research Network - Energy Science Research Center, in which the desired parameters were achieved by blasting, while the gas tightness was achieved by electron beam welding.
Properties
- Subtitle
PurAID® project in Ghana
Image gallery
dsc6750.jpg
Intro
Our first project in Ghana, the trial operation of our PurAID® modular, mobile, pallet-based water purification equipment installed in the settlement of Akim Wenchi, has been successfully completed. With the help of PurAID®, iron and manganese impurities, as well as disease-causing bacteria, are removed from the water of the public wells of the town of 12,000 inhabitants.
Properties
- Subtitle
